Beta Power Controls LLP

Water-cooling is a more efficient cooling method since the thermal resistance is much lower between the heat sink and water tubes as opposed to the heat sink and forced air.

Water has a much higher energy density compared to air hence less volume is needed.

Cooling power is solely dependent on water temperature and water flow, which means that even if the ambient temperature around the rectifier is very high, the rectifier can still operate as normal.

Availability of cooling water circuit needed.

Water-cooled rectifiers run a risk of freezing if placed in a space where the temperature can fall below zero degrees Celsius.

Obvious risk for condensation issues if the heat sink in the rectifier is colder than the ambient temperature.

To avoid risk of freezing damage as well as condensation issues it is absolutely necessary to control the water flow. Let the water flow in case of risk for freezing damages and stop the flow in case of risk for condensation issues.

Since the LT system sometimes contains sediment that might clog the water tubes, a strainer might be needed, which must be cleaned regularly.

Regardless of whether you choose an air-cooled or a water-cooled rectifier, the environmental requirements for the rectifier’s performance are the same. They operate in the same environment and feed the same load. The only difference is that the heat generated inside the rectifier is removed by using either forced air or water as cooling media.

Making sure your rectifier has a modular design is also crucial, as it ensures easy troubleshooting and maintenance if anything were to go wrong. From an operational perspective, this is especially important. Because if one module malfunctions or breaks down, the remaining modules will compensate for the output lost from the malfunctioned component. If this were to occur, the rectifier will keep operating – albeit at a reduced capacity – thanks to the remaining modules’ built-in redundancy. This is of great help when troubleshooting the system. But more importantly: it is of great value for the ballast water management system owner, as they can continue to load and unload their cargo.

Water-cooling is a more efficient cooling method since the thermal resistance is much lower between the heat sink and water tubes as opposed to the heat sink and forced air.

Water has a much higher energy density compared to air hence less volume is needed.

Cooling power is solely dependent on water temperature and water flow, which means that even if the ambient temperature around the rectifier is very high, the rectifier can still operate as normal.

Availability of cooling water circuit needed.

Water-cooled rectifiers run a risk of freezing if placed in a space where the temperature can fall below zero degrees Celsius.

Obvious risk for condensation issues if the heat sink in the rectifier is colder than the ambient temperature.

To avoid risk of freezing damage as well as condensation issues it is absolutely necessary to control the water flow. Let the water flow in case of risk for freezing damages and stop the flow in case of risk for condensation issues.

Since the LT system sometimes contains sediment that might clog the water tubes, a strainer might be needed, which must be cleaned regularly.

Regardless of whether you choose an air-cooled or a water-cooled rectifier, the environmental requirements for the rectifier’s performance are the same. They operate in the same environment and feed the same load. The only difference is that the heat generated inside the rectifier is removed by using either forced air or water as cooling media.

Making sure your rectifier has a modular design is also crucial, as it ensures easy troubleshooting and maintenance if anything were to go wrong. From an operational perspective, this is especially important. Because if one module malfunctions or breaks down, the remaining modules will compensate for the output lost from the malfunctioned component. If this were to occur, the rectifier will keep operating – albeit at a reduced capacity – thanks to the remaining modules’ built-in redundancy. This is of great help when troubleshooting the system. But more importantly: it is of great value for the ballast water management system owner, as they can continue to load and unload their cargo.

IGBT RECTIFIER 
Beta power  make IGBT Rectifiers are designed to meet industrial application requirements. An insulated –Gate Bipolar Transistor (IGBT) uses relatively high frequency switching and pulse width modulation (PWM) technology for voltage and current regulation whilst a silicon controlled rectifier (SCR) uses relatively low frequency switching and phase shift technology.

Beta power make IGBT based Rectifiers are smaller in size and lighter in weight, more energy efficient and more cost effective compared to SCR & Rolling contact type Technology”

APPLICATION FIELD

The IGBT Rectifier is used for Plating, Anodizing, Electro polishing, Electrolysis, Electro winning, Electro Refining, Cathode Electro Deposition (C.E.D. Coating), Tinning, Electronic Cleaning, Pickling, Surface Coloring, Cathode Protection.

•  Inductive Heating
•  D.C. Heating
•  Single Phase AC Heating

•  Waste Water Treatment
•  Sea Water Treatme    
• PROTECTION FEATURES

•  Overheat
•  Output over voltage / under voltage
•  Output over current
•  Output short circuit
•  Cooling water pressure (Single Phase Protection)

BETA POWER Electro Plating Rectifier,
We beta Services provides wide varieties of transformer rectifiers for cathodic protection of steel structures of pipelines, tank farms, storage fields and jetties. DC power equipment, such as transformer rectifiers, supplies current applied for the cathodic protection of buried or immersed metal structures. All transformer rectifiers can be used in indoor and outdoor locations and are capable of supplying continuous, full-rated output at ambient temperatures of up to 60°C and ingress protection class up to IP55/ IP56 / IP65. Standard features of variety of AC voltage inputs, Single Phase/Three Phase, 50 or 60Hz, AC /DC High Energy lightning protection, waterproof, Stainless Steel, perforated screens, Silicon diodes protected by surge suppressors and current limiting breakers < 100 Amps or fuses, Heavy duty transformer with 15% over-design for reserve capacity, Heavy duty 11-gauge hot dip galvanized cabinet with Stainless Steel Hardware, Multi-strand, high temperature, insulated flexible wiring, All electrical connection hardware is Nickel Plated and double-nutted or soldered, DC circuit breakers, Meter switches, Anodized finish with clear coat for aluminum cabinets, Power-on indicator light, DC failure warning lights and Front and side opening doors for easy maintenance.

Type of CPTR Unit:

Air Cooled Transformer Rectifier Unit

For Normal Climate & Ambient Condition:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/75A, 50V/100A, 100V/150A, 150V/150A,etc.

Oil Cooled Transformer Rectifier Unit

For special climatic conditions such as high humidity and high ambient temperature:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/50A, 100V/100A, 100V/150A, 150V/150A, etc.

Explosion proof Transformer Rectifier Unit

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

BETA POWER Electro Plating Rectifier,
We beta Services provides wide varieties of transformer rectifiers for cathodic protection of steel structures of pipelines, tank farms, storage fields and jetties. DC power equipment, such as transformer rectifiers, supplies current applied for the cathodic protection of buried or immersed metal structures. All transformer rectifiers can be used in indoor and outdoor locations and are capable of supplying continuous, full-rated output at ambient temperatures of up to 60°C and ingress protection class up to IP55/ IP56 / IP65. Standard features of variety of AC voltage inputs, Single Phase/Three Phase, 50 or 60Hz, AC /DC High Energy lightning protection, waterproof, Stainless Steel, perforated screens, Silicon diodes protected by surge suppressors and current limiting breakers < 100 Amps or fuses, Heavy duty transformer with 15% over-design for reserve capacity, Heavy duty 11-gauge hot dip galvanized cabinet with Stainless Steel Hardware, Multi-strand, high temperature, insulated flexible wiring, All electrical connection hardware is Nickel Plated and double-nutted or soldered, DC circuit breakers, Meter switches, Anodized finish with clear coat for aluminum cabinets, Power-on indicator light, DC failure warning lights and Front and side opening doors for easy maintenance.

Type of CPTR Unit:

Air Cooled Transformer Rectifier Unit

For Normal Climate & Ambient Condition:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/75A, 50V/100A, 100V/150A, 150V/150A,etc.

Oil Cooled Transformer Rectifier Unit

For special climatic conditions such as high humidity and high ambient temperature:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/50A, 100V/100A, 100V/150A, 150V/150A, etc.

Explosion proof Transformer Rectifier Unit

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

Additional Information:

• Item Code: bp02TR230
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: EXW
• Production Capacity: 20/Month
• Delivery Time: 3 -7 Days

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

Additional Information:

• Item Code: bp09TR415
• Port of Dispatch: EXW
• Production Capacity: 10 /Month
• Delivery Time: 10 -15days

IGBT RECTIFIER 
Beta power  make IGBT Rectifiers are designed to meet industrial application requirements. An insulated –Gate Bipolar Transistor (IGBT) uses relatively high frequency switching and pulse width modulation (PWM) technology for voltage and current regulation whilst a silicon controlled rectifier (SCR) uses relatively low frequency switching and phase shift technology.

Beta power make IGBT based Rectifiers are smaller in size and lighter in weight, more energy efficient and more cost effective compared to SCR & Rolling contact type Technology”

APPLICATION FIELD

The IGBT Rectifier is used for Plating, Anodizing, Electro polishing, Electrolysis, Electro winning, Electro Refining, Cathode Electro Deposition (C.E.D. Coating), Tinning, Electronic Cleaning, Pickling, Surface Coloring, Cathode Protection.

•  Inductive Heating
•  D.C. Heating
•  Single Phase AC Heating

•  Waste Water Treatment
•  Sea Water Treatme    
• PROTECTION FEATURES

•  Overheat
•  Output over voltage / under voltage
•  Output over current
•  Output short circuit
•  Cooling water pressure (Single Phase Protection)

With our years of experience & in depth knowledge in this field, we are engaged in offering a quality-assured array of Industrial Rectifiers, We beta Services provides wide varieties of transformer rectifiers for cathodic protection of steel structures of pipelines, tank farms, storage fields and jetties. DC power equipment, such as transformer rectifiers, supplies current applied for the cathodic protection of buried or immersed metal structures.

All transformer rectifiers can be used in indoor and outdoor locations and are capable of supplying continuous, full-rated output at ambient temperatures of up to 60°C and ingress protection class up to IP55/ IP56 / IP65. Standard features of variety of AC voltage inputs, Single Phase/Three Phase, 50 or 60Hz, AC /DC High Energy lightning protection, waterproof, Stainless Steel, perforated screens, Silicon diodes protected by surge suppressors and current limiting breakers < 100 Amps or fuses, Heavy duty transformer with 15% over-design for reserve capacity, Heavy duty 11-gauge hot dip galvanized cabinet with Stainless Steel Hardware, Multi-strand, high temperature, insulated flexible wiring, All electrical connection hardware is Nickel Plated and double-nutted or soldered, DC circuit breakers, Meter switches, Anodized finish with clear coat for aluminum cabinets, Power-on indicator light, DC failure warning lights and Front and side opening doors for easy maintenance.

Type of CPTR Unit:

Air Cooled Transformer Rectifier Unit

For Normal Climate & Ambient Condition:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/75A, 50V/100A, 100V/150A, 150V/150A,etc.

Oil Cooled Transformer Rectifier Unit

For special climatic conditions such as high humidity and high ambient temperature:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/50A, 100V/100A, 100V/150A, 150V/150A, etc.

Explosion proof Transformer Rectifier Unit

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

Additional Information:

• Item Code: bp10TR415
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: EXW
• Production Capacity: 10/Month
• Delivery Time: 5-7Days

Along with the ever-growing number of electric vehicles on the market and pressure from governments to reduce vehicle emissions to zero latest by 2050, there is a strong need for more efficient charging solutions. As various consumer studies show, the acceptance of electromobility very much depends on the availability and duration of the charging process, high-power DC charging stations are the answer to these market requirements. Already today, a typical EV can charge about 80% of its battery capacity in less than 10 minutes. This is comparable to refueling a conventional car with internal combustion engine.

As the market leader in power electronics, Beta helps you to bring energy-efficient DC fast charging designs to life. Benefit from one of the most comprehensive, ready-to-implement one-stop product and design portfolios on the market that covers the entire product range from power conversion, microcontrollers, security, auxiliary power supply, and communication.

Beta is part of the international Charging Interface Initiative e.V. (CharIN). CharIN’s goal is to develop, establish and promote a global charging system standard for all kinds of battery-powered electric vehicles.


Specifications:

• Voltage Range 170V To 230V AC
• Protection Type: Recovers Automatically After Fault Condition Is Removed
• Overvoltage 100% Rated Output Voltage
• Protection Type: Recovers Automatically After Fault Condition Removed.
• Indication LED: Mains on / Charge On / Trip On 
• Metering Digital Output Volt & Amp
• Working Temp. (- 10 Deg c To 50 Deg c.)
• Working Humidity 20 To 90% Rh Non Condensing.
• Storage Temp./Humidity (-10 to 85 Deg C 10 To 95%Rh)
• With Stand Voltage I/P-o/P:2Kvdc,I/P-earth: 2kV DC
• Isolation Resistance I/P-o/P,I/P-earth: 100Mohms/500Vdc.
• Emi & Emc Designed To Meet En55022, En61000-4-2.

• Wide input supply range
• Built in EMI filter, low ripple noise
• Protection: Short circuit / Over load / Over voltage
• 100% Full Load Burn in test
• High efficiency, long life and high reliability
• Miniature size

• Voltmeter & Ammeter for DC voltage & current monitoring

  Fine-tune adjustment for current setting

  Reverse polarity protection

  Low voltage & high voltage protection

  Battery full charge auto cut-off

Additional Information:

• Production Capacity: 100
• Delivery Time: 2 -3 days

IGBT RECTIFIER 
Beta power  make IGBT Rectifiers are designed to meet industrial application requirements. An insulated –Gate Bipolar Transistor (IGBT) uses relatively high frequency switching and pulse width modulation (PWM) technology for voltage and current regulation whilst a silicon controlled rectifier (SCR) uses relatively low frequency switching and phase shift technology.

Beta power make IGBT based Rectifiers are smaller in size and lighter in weight, more energy efficient and more cost effective compared to SCR & Rolling contact type Technology”

APPLICATION FIELD

The IGBT Rectifier is used for Plating, Anodizing, Electro polishing, Electrolysis, Electro winning, Electro Refining, Cathode Electro Deposition (C.E.D. Coating), Tinning, Electronic Cleaning, Pickling, Surface Coloring, Cathode Protection.

•  Inductive Heating
•  D.C. Heating
•  Single Phase AC Heating

•  Waste Water Treatment
•  Sea Water Treatme    
• PROTECTION FEATURES

•  Overheat
•  Output over voltage / under voltage
•  Output over current
•  Output short circuit
•  Cooling water pressure (Single Phase Protection)

IGBT RECTIFIER 
Beta power  make IGBT Rectifiers are designed to meet industrial application requirements. An insulated –Gate Bipolar Transistor (IGBT) uses relatively high frequency switching and pulse width modulation (PWM) technology for voltage and current regulation whilst a silicon controlled rectifier (SCR) uses relatively low frequency switching and phase shift technology.

Beta power make IGBT based Rectifiers are smaller in size and lighter in weight, more energy efficient and more cost effective compared to SCR & Rolling contact type Technology”

APPLICATION FIELD

The IGBT Rectifier is used for Plating, Anodizing, Electro polishing, Electrolysis, Electro winning, Electro Refining, Cathode Electro Deposition (C.E.D. Coating), Tinning, Electronic Cleaning, Pickling, Surface Coloring, Cathode Protection.

HEATING

•  Inductive Heating
•  D.C. Heating
•  Single Phase AC Heating

WATER TREATMENT

•  Waste Water Treatment
•  Sea Water Treatme    
• PROTECTION FEATURES

•  Overheat
•  Output over voltage / under voltage
•  Output over current
•  Output short circuit
•  Cooling water pressure (Single Phase Protection)

Our Tamil Nadu Supply Network

Coimbatore, Erode, Salem, Karur, Namakkal, Trichy, Thanjavur, Kumbakonam, Mayiladuthurai, Panruti, Cuddalore, Pondicherry, Villupuram, Chennai, Vellore, Ambur, Krishnagiri, Hosur, Madurai, Sivakasi, Rajapalayam, Virudhunagar.

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kochi, Ernakulam, Palakkad, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Maharashtra,West Bengal, Andaman and Nicobar Island and All over India.

Our Export / Global Network
Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Qatar, Congo, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Angola, Mozambique, Peru, Singapore, Dubai, Lagos, Bahrain, Uganda, Australia, USA, New Zealand.Nepal,Indonesia, Bangaldesh,Iraq,

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

Additional Information:

• Item Code: bp20TR230
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: EXW
• Production Capacity: 20/Month
• Delivery Time: 5 - 7 Days

Along with the ever-growing number of electric vehicles on the market and pressure from governments to reduce vehicle emissions to zero latest by 2050, there is a strong need for more efficient charging solutions. As various consumer studies show, the acceptance of electromobility very much depends on the availability and duration of the charging process, high-power DC charging stations are the answer to these market requirements. Already today, a typical EV can charge about 80% of its battery capacity in less than 10 minutes. This is comparable to refueling a conventional car with internal combustion engine.

As the market leader in power electronics, Beta helps you to bring energy-efficient DC fast charging designs to life. Benefit from one of the most comprehensive, ready-to-implement one-stop product and design portfolios on the market that covers the entire product range from power conversion, microcontrollers, security, auxiliary power supply, and communication.

Beta is part of the international Charging Interface Initiative e.V. (CharIN). CharIN’s goal is to develop, establish and promote a global charging system standard for all kinds of battery-powered electric vehicles.


Specifications:

• Voltage Range 170V To 230V AC
• Protection Type: Recovers Automatically After Fault Condition Is Removed
• Overvoltage 100% Rated Output Voltage
• Protection Type: Recovers Automatically After Fault Condition Removed.
• Indication LED: Mains on / Charge On / Trip On 
• Metering Digital Output Volt & Amp
• Working Temp. (- 10 Deg c To 50 Deg c.)
• Working Humidity 20 To 90% Rh Non Condensing.
• Storage Temp./Humidity (-10 to 85 Deg C 10 To 95%Rh)
• With Stand Voltage I/P-o/P:2Kvdc,I/P-earth: 2kV DC
• Isolation Resistance I/P-o/P,I/P-earth: 100Mohms/500Vdc.
• Emi & Emc Designed To Meet En55022, En61000-4-2.

• Wide input supply range
• Built in EMI filter, low ripple noise
• Protection: Short circuit / Over load / Over voltage
• 100% Full Load Burn in test
• High efficiency, long life and high reliability
• Miniature size

• Voltmeter & Ammeter for DC voltage & current monitoring

  Fine-tune adjustment for current setting

  Reverse polarity protection

  Low voltage & high voltage protection

  Battery full charge auto cut-off

Additional Information:

• Production Capacity: 100

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

AC DC Rectifier We Beta Services provides wide varieties of transformer rectifiers for cathodic protection of steel structures of pipelines, tank farms, storage fields and jetties. DC power equipment, such as transformer rectifiers, supplies current applied for the cathodic protection of buried or immersed metal structures. All transformer rectifiers can be used in indoor and outdoor locations and are capable of supplying continuous, full-rated output at ambient temperatures of up to 60°C and ingress protection class up to IP55/ IP56 / IP65. Standard features of variety of AC voltage inputs, Single Phase/Three Phase, 50 or 60Hz, AC /DC High Energy lightning protection, waterproof, Stainless Steel, perforated screens, Silicon diodes protected by surge suppressors and current limiting breakers < 100 Amps or fuses, Heavy duty transformer with 15% over-design for reserve capacity, Heavy duty 11-gauge hot dip galvanized cabinet with Stainless Steel Hardware, Multi-strand, high temperature, insulated flexible wiring, All electrical connection hardware is Nickel Plated and double-nutted or soldered, DC circuit breakers, Meter switches, Anodized finish with clear coat for aluminum cabinets, Power-on indicator light, DC failure warning lights and Front and side opening doors for easy maintenance.

Type of CPTR Unit:

Air Cooled Transformer Rectifier Unit

For Normal Climate & Ambient Condition:

Manual/Automatic Mode:

DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/75A, 50V/100A, 100V/150A, 150V/150A,etc.

Oil Cooled Transformer Rectifier Unit

For special climatic conditions such as high humidity and high ambient temperature:

Manual/Automatic Mode:
DC Rating 20V/20A, 25V/25A, 25V/50A, 50V/50A, 100V/100A, 100V/150A, 150V/150A, etc.
Explosion proof Transformer Rectifier Unit

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Andaman and Nicobar Islands & All Over India.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia, Nigeria, UAE, Kuwait, UK, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Mozambique, Peru, Singapore, Logos.

Additional Information:

• Item Code: bp19TR415
• Port of Dispatch: EXW
• Production Capacity: 10 / Month
• Delivery Time: 5 - 7 Days